Elastomer Jaw Couplings TNM

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• The elastic ring can be replaced only with move a part of the coupled machines (two part design).
• Bores up to max. 230 mm
• Torques up to TKn = 41,000 Nm / TKmax = 97,500 Nm
• Speeds up to max = 5,000 rpm

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• The elastic ring can be replaced only with move a part of the coupled machines (two part design).
• Bores up to max. 190 mm
• Torques up to TKn = 20,500 Nm / TKmax = 49,000 Nm
• Speeds up to nmax = 4,580 rpm

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• The elastic ring can be replaced without having to move the coupled machines (multi-part models)
• Bores up to max. 180 mm
• Torques up to TKn = 20,500 Nm / TKmax = 49,000 Nm
• Speeds up to nmax = 4,580 rpm

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• The elastic ring can be replaced only with move a part of the coupled machines (two part design).
• Bores up to max. 190 mm
• Torques up to TKn = 20,500 Nm / TKmax = 49,000 Nm
• Speeds up to nmax = 4,200 rpm

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• The elastic ring can be replaced without having to move the coupled machines (multi-part models)
• Bores up to max. 280 mm
• Torques up to TKn = 20,500 Nm / TKmax = 49,000 Nm
• Speeds up to nmax = 4,200 rpm

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• The elastic ring can be replaced without having to move the coupled machines (multi-part models)
• Bores up to max. 150 mm
• Torques up to TKn = 9,900 Nm / TKmax = 23,400 Nm
• Speeds up to nmax = 5,000 rpm

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally fexible, compensate for angular, radial and axial shaft misalignment
• Pre-compressed individual buffers connected to an inter- mediate ring
• Intermediate rings of different Shore hardness levels (standard Pb72, hard Pb82), can be used from –30 °C to +100 °C
• Changing of the elastic intermediate ring with movement of the connected aggregates

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• The elastic ring can be replaced without having to move the coupled machines (multi-part models)
• Bores up to max. 260 mm
• Torques up to TKn = 41,000 Nm / TKmax = 97,500 Nm
• Speeds up to nmax = 5,000 rpm

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• The elastic ring can be replaced without having to move the coupled machines (multi-part models)
• Bores up to max. 150 mm
• Torques up to TKn = 7,550 Nm / TKmax = 18,000 Nm
• Speeds up to nmax = 4,500 rpm

Additional Information:

• Packaging Details: Box

Product Details:

• Torsionally flexible, compensate for angular, radial and axial shaft misalignment
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from 30C to +100C
• The elastic ring can be replaced without having to move the coupled machines (three-part models)
• Bores up to max. 280 mm
• Torques up to TKn = 41,000 Nm / TKmax = 97,500 Nm
• Speeds up to nmax = 5,000 rpm

Additional Information:

• Packaging Details: Box